Search
WORLDWIDE SHIPPING
fast, flexible, secure options
ONLINE SUPPORT 24 / 7
anytime, anywhere help
MONEY BACK GUARANTEE
shop with confidence
WIDE SELECTION
every day low prices
Electronics
For vivo iQOO Z7 China V2270A OEM LCD Screen With Digitizer Full Assembly
- Before Installation Notes
- Tips 1: Test before installation
- When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
- Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
- Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
- Tips 2: Simulates testing
- Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
- Tips 3: Do not over-bend cable
A$19.86 A$22.85
Waveshare 2.9 inch 296 x 128 Pixel 5-Points Capacitive Touch Black/White E-Paper E-Ink Display HAT for Raspberry Pi Pico, SPI Interface
- 2.9inch capacitive touch ePaper module, 296??128 resolution
- 5-points touch support, user-defined wakeup gesture
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- Reversed control interface, for connecting with controller boards like Arduino/STM32, etc.
- Comes with development resources and manual (examples for Raspberry Pi)
- Operating voltage: 3.3V/5V
A$41.22 A$51.10
Waveshare 2.9 inch 296 x 128 Pixel Touch Black/White e-Paper Module for Raspberry Pi Pico, SPI Interface
- 2.9 inch capacitive touch ePaper module, 296??128 resolution
- 5-points touch support, user-defined wakeup gesture
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- SPI / I2C interface, requires minimal IO pins
- Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
A$41.10 A$48.50
Waveshare 2.66 inch 296 x 152 Pixel Black/White E-Paper E-Ink Display Module for Raspberry Pi Pico, SPI Interface
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- SPI interface, requires minimal IO pins
- Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
- Operating voltage: 3.3V
- Display color: Black, white
- Resolution: 296 x 152 pixels
- Grey scale: 2
A$31.86 A$36.96
Waveshare Multi Band 2G GSM/GPRS LBS A7670E LTE Cat-1 HAT for Raspberry Pi, for Europe, Southeast Asia, West Asia, Africa, China, South Kor
- The A7670E Cat-1 HAT is an LTE Cat-1 module, which supports wireless communication modes including LTE-TDD, LTE-FDD, GSM, GPRS and EDGE, with up to 10Mbps downlink rate and 5Mbps uplink rate. It supports Windows/Linux operating systems and multiple network protocols. The module size is the same as SIM7000/SIM7070 series, and the AT commands is mostly compatible with SIM7600 series. It is suitable for IoT applications like remote information processing, monitoring devices, POS, industrial routers, remote diagnosis, and so on.
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- Support protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL
- Support dial-up, telephone call, SMS
- Support LBS base station positioning, it is able to get the approximate position info via mobile network
- TTS (Text To Speech) feature, texts in Chinese/English can be converted into spoken words
- Onboard USB interface, for testing AT Commands, network communication, and so on
- Onboard audio jack for sound recording, making telephone call, listening the TTS resulting speech, etc.
A$50.61 A$59.22
Waveshare Raspberry Pi PoE+ HAT Ethernet Expansion Board for Raspberry Pi 3B+/4B
- Product Overview
- The Raspberry Pi PoE+ HAT is a Power Over Ethernet (PoE+) accessory for the Raspberry Pi 3B+/4B. Compared to its predecessor Raspberry Pi PoE HAT, it features better cooling effect, implementing the 802.3af/at standard with 5V DC/4A larger power output, providing enough power for both Raspberry Pi 3B+/4B at max load and other peripherals at the same time.
- By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
- PoE standard: 802.3af/at
- Input voltage: 37-57 V DC, Class 4 device
- Output voltage/current: 5V DC/4A
- Current sense: Yes
- Transformer design: Planar
A$68.10 A$82.40
Waveshare UPS Module Uninterruptible Power Supply 600mAh Li-Po Battery Module Stackable Board for Raspberry Pi Pico
- The Pico-UPS-B is a dedicated UPS (Uninterruptible Power Supply) module designed for Raspberry Pi Pico. It incorporates Li-po battery switching charger with power path management, and voltage/current monitoring chip, allows monitoring the battery operating status via I2C bus. What is more, the male pin header make it possible to "stack" other modules on top.
- Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
- Incorporates Li-po battery switching charger with dynamic power path management, more stable power supply
- I2C bus communication, monitoring the battery voltage, current, power, and remaining capacity in real time
- Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, more safe and stable
- Onboard recharging indicator, power indicator, easy to check the battery status
- Come with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
- Charging voltage: 5V
A$26.54 A$32.38
Waveshare L76B GNSS Module for Raspberry Pi Pico, Support GPS, BDS, QZSS
- The Pico-GPS-L76B is a GNSS module designed for Raspberry Pi Pico, with multi satellite systems support including GPS, BDS, and QZSS. It has advantages such as fast positioning, high accuracy, and low power consumption, etc. Combined with the Raspberry Pi Pico, it is easy to use global navigating function.
- Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
- Multi satellite systems support: GPS, BDS, and QZSS
- Easy, self track prediction technology, help quick positioning
- AlwaysLocate, intelligent controller of periodic mode for power saving
- Support D-GPS, SBAS (WAAS/EGNOS/MSAS/GAGAN)
- UART communication baudrate: 4800~115200bps (9600bps by default)
- Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
A$30.72 A$37.48
Waveshare 5 inch Slimmed-down Version 800 x 480 Toughened Glass Panel Capacitive Touch Screen LCD (H)
- Device & System Support
- Raspberry Pi
- Support Raspbian, 5-points touch, driver free
- Support Ubuntu / Kali / WIN10 IoT, single point touch, driver free
- Support Retropie, driver free
- Support all versions of Raspberry Pi
- PC
- Support Windows 10 / 8.1 / 8 / 7, 5-points touch, driver
A$76.76 A$89.04
Waveshare SGP40 VOC Volatile Organic Compounds Gas Sensor, I2C Bus
- The SGP40 VOC Sensor is a digital VOC (Volatile Organic Compounds) sensor module which incorporates SGP40, designed for air quality monitoring. It can be used to measure fire coal, natural gas emissions, cigarette/cooking smoke, and emissions from constructing activity, decoration material, furnitures, home appliances, then generate digital signals for triggering air treatment devices. The SGP40 VOC Sensor is small in size for easy integration into air treatment devices and air quality monitors, definitely an ideal choice for learning air quality monitoring.
- Incorporates SGP40, for measuring 0 ~ 1000 ppm of ethanol equivalents
- Features humidity-compensation and low-heat-dissipation, providing outstanding performance on sorts of environments
- Digital I2C output, less interference
- Onboard voltage translator, compatible with 3.3V/5V operating voltage
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
- Sensor: SGP40
- Measurement range: 0~1000 ppm of ethanol equivalents
A$26.16 A$31.39
Waveshare 7.5 inch 800x480 Pixel Red Black White E-Paper E-Ink Display Module (B) for Raspberry Pi Pico, SPI Interface
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- SPI interface, requires minimal IO pins
- 2x user buttons and 1x reset button for easy interacting
- Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
- Advantages Of EINK
- E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
- E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180 degree viewing angle. It is usually used as e-reader due to its paper-like effect.
A$92.33 A$115.42
Waveshare 5.83 inch 648x480 Pixel Red Black White E-Paper E-Ink Display Module (B) for Raspberry Pi Pico, SPI Interface
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- SPI interface, requires minimal IO pins
- 2x user buttons and 1x reset button for easy interacting
- Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
- Operating voltage: 3.3V
- Display color: Red, black, white
- Resolution: 648x480 pixels
A$79.73 A$97.27
NEED HELP?
Payment options
