Consumer Electronics

View as Grid List

Sort by

Display per page

Waveshare 16498 3.2inch 320x240 Pixels Touch LCD (D), With Touch Panel And Stand-Alone Controllers

Working voltage: 3.3V
Resolution: 320 240 pixels
Interface: 8080 parallel port + SPI
Display panel: TN
LCD controller: ILI9341
Display size: 48.6 64.8 mm
Pixel pitch: 0.198 0.198 mm
Module size 94.97 62.24mm

A$31.16 A$38.00

WAVESHARE 5 inch Touch Screen Expansion for Raspberry Pi CM4, PoE Header, Gigabit Ethernet, 4K Output

I am a Raspberry Pi CM4 kit with a 5 inch touch screen all-in-one machine. The PoE pin Gigabit Ethernet port supports 4K output, onboard four-way USB2.0, 5-inch touch screen, etc. The all-in-one kit is convenient for users.
Notes:
Do not plug and unplug any device except USB and HDMI while the baseboard is working.
If the fan needs to be replaced, please confirm the fan voltage and then power on.
The USB SLAVE interface is used to burn the image and cannot be used as an OTG interface.
In normal use, it is necessary to provide at least 5V 2.5A power supply for CM4. Otherwise, there may be problems such as automatic shutdown, frequency reduction and so on.
Onboard default 4-way USB 2.0 interface.
Support POE pins, additional POE HAT is required if POE function is required.

A$120.25 A$139.49

WAVESHARE 7.9 inch Capacitive Touch Display For Raspberry Pi, 400 x 1280, IPS, DSI Interface

7.9 inch IPS display with capacitive touch panel, hardware resolution is 400x1280.
Capacitive touch, supports up to 5-points touch.
Toughened glass capacitive touch panel, 6H hardness.
DSI interface, refresh rate up to 60Hz.
Working with Raspberry Pi, we provide the driver for Raspberry Pi OS.
Brightness is adjustable by software.
Support Pi 4B/3B+/3A+, CM3+/4 ,must be used with adapter cable.
Package List

A$118.17 A$135.88

WAVESHARE 11.9 inch Capacitive Touch Display For Raspberry Pi, 320 x 1480, IPS, DSI Interface

11.9 inch IPS screen, 320 x1480 high resolution
Toughened glass capacitive touch panel, 6H hardness.
Capacitive touch, supports up to 5-point touch.
Working with Raspberry Pi, we provide the driver for Raspberry Pi OS.
Adjustable brightness via software
DSI interface, refresh rate up to 60Hz.
Support Pi 4B/3B+/3A+, CM3+/4,must be used with adapter cable
Package List

A$150.72 A$182.38

WAVESHARE Mini-Computer Powered by Raspberry Pi CM4 Touch Screen (UK Plug)

13.3inch IPS screen,1920x1080 high resolution
6H hardness toughened glass capacitive touch panel, 10-points touch
Mini-computer powered by Raspberry Pi CM4
Powerful controller: Raspberry Pi CM4; Not just a simple display, with powerful Raspberry Pi CM4 (CM4104000) inside
Multiple OS Support: Raspberry Pi OS / Ubuntu / Kali / WIN10 IoT / Retropie
Multi languages OSD menu, for power management, brightness / contrast adjustment, etc.
With USB/ETH port, 3.5mm audio jack, embedded Hi-Fi speaker
Could be a Raspberry Pi tablet: Having fun with this Raspberry Pi tablet, watch movies, listen music

A$705.95 A$825.96

WAVESHARE Mini-Computer Powered by Raspberry Pi CM4 Touch Screen (EU Plug)

13.3inch IPS screen,1920x1080 high resolution
6H hardness toughened glass capacitive touch panel, 10-points touch
Mini-computer powered by Raspberry Pi CM4
Powerful controller: Raspberry Pi CM4; Not just a simple display, with powerful Raspberry Pi CM4 (CM4104000) inside
Multiple OS Support: Raspberry Pi OS / Ubuntu / Kali / WIN10 IoT / Retropie
Multi languages OSD menu, for power management, brightness / contrast adjustment, etc.
With USB/ETH port, 3.5mm audio jack, embedded Hi-Fi speaker
Could be a Raspberry Pi tablet: Having fun with this Raspberry Pi tablet, watch movies, listen music

A$705.95 A$840.08

Waveshare 7 inch 800480 IPS Capacitive Touch Display, DSI Interface, 5-Point Touch with Case

IPS LCD screen, more natural gradient colors and more vivid display colors
170-degree wide viewing angle, excellent display performance
High-quality picture, clear and bright
The screen has more color details and a better visual experience
Support capacitive 5-point touch
Support adjusting brightness through software
Display size: 7 inches
Product size: 192.96 x 110.8mm

A$100.63 A$118.75

Waveshare 7 inch 800480 IPS Capacitive Touch Display, DSI Interface, 5-Point Touch without Case

IPS LCD screen, more natural gradient colors and more vivid display colors
170-degree wide viewing angle, excellent display performance
High-quality picture, clear and bright
The screen has more color details and a better visual experience
Support capacitive 5-point touch
Support adjusting brightness through software
Display size: 7 inches
Product size: 192.96 x 110.8mm

A$90.42 A$104.88

Waveshare ESP32-S3 Microcontroller 2.4GHz Wi-Fi Development Board ESP32-S3-WROOM-1-N8R8 Module Standard Ver. With Pinheader

ESP32-S3-DEV-KIT-N8R8 is a microcontroller development board with a small size and a variety of digital interfaces.
In terms of software, you can choose ESP-IDF, Arduino, MicroPython and other development environments for development, so that you can get started easily and quickly, and apply them to products.
Using ESP32-S3-WROOM-1-N8R8 module, equipped with Xtensa 32-bit LX7 dual-core processor, the main frequency is up to 240MHz
Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 8MB Flash memory
Integrated 2.4GHz Wi-Fi and Bluetooth Low Energy (Bluetooth LE) dual-mode wireless communication with superior RF performance
Using the USB Type-C interface, no need to tangle with the front and back plugs
The onboard CH343 and CH334 chips can meet the development and use requirements of USB and UART through a Type-C interface
Lead out rich peripheral interfaces, pin compatible with ESP32-S3-DevKitC-1 development board, strong compatibility and expandability

A$23.44 A$29.30

Waveshare ESP32-S3 Microcontroller 2.4GHz Wi-Fi Development Board ESP32-S3-WROOM-1-N8R8 Module Standard Ver.

ESP32-S3-DEV-KIT-N8R8 is a microcontroller development board with a small size and a variety of digital interfaces.
In terms of software, you can choose ESP-IDF, Arduino, MicroPython and other development environments for development, so that you can get started easily and quickly, and apply them to products.
Using ESP32-S3-WROOM-1-N8R8 module, equipped with Xtensa 32-bit LX7 dual-core processor, the main frequency is up to 240MHz
Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 8MB Flash memory
Integrated 2.4GHz Wi-Fi and Bluetooth Low Energy (Bluetooth LE) dual-mode wireless communication with superior RF performance
Using the USB Type-C interface, no need to tangle with the front and back plugs
The onboard CH343 and CH334 chips can meet the development and use requirements of USB and UART through a Type-C interface
Lead out rich peripheral interfaces, pin compatible with ESP32-S3-DevKitC-1 development board, strong compatibility and expandability

A$22.60 A$26.43

CJMCU-ADS1115 16-Bit Precision Analog-To-Digital Converter AdC 4-Channel Development Board Module

The portable instrument is automatically powered off after conversion and greatly reduces current consumption during idle periods
Features: easy to implement, high precision, low current consumption, multi-mode conversion
Power supply voltage: 2-5.5v
Working temperature: -40 to 125 degrees celsius
Programmable data rate: Transmission via I2C compatible serial interface
Single mode: Automatic shutdown with onboard reference and oscillator
Size: about 16 x 28mm
Weight: about 2.5g

A$7.86 A$9.36

Waveshare RS485 CAN Shield, RS485 CAN Shield Designed for NUCLEO/XNUCLEO

Overview
The RS485 CAN Shield will easily enable RS485/CAN communication functions for your NUCLEO/XNUCLEO Arduino boards.
Features
1. Arduino standard interfaces, compatible with Arduino boards like Arduino UNO, Leonardo, NUCLEO, XNUCLEO
When using with Arduino UNO, Leonardo, the CAN function is unavailable due to hardware limitation
RS485 function, onboard transceiver SP3485/MAX3485, 3.3V power supply
CAN function, onboard transceiver SN65HVD230, 3.3V power supply

A$18.45 A$22.68