Sort by
Display per page
- Applicable: home theater speakers DIY modification upgrade
- Filter: 1 high, 1 medium, 2 low
- Power: 250W
- Frequency point: bass-midrange 780Hz/tweeter-midrange 5000Hz
- Impedance: 4-8 ohm
- 3 large 41mm frames, fixed with ties to prevent resonance
- Non-soldering terminals, more convenient wiring
- Size: 115 x 78mm
A$14.95 A$18.09
- Applicable: home theater high school and low three-way speaker modification upgrade
- Filter: 1 high, 1 medium, 1 low
- Power: 350W
- Impedance: 4-8 ohm
- Frequency point: 900Hz, 3750Hz
- Circuit: 12db/oct
- High frequency part is clear and recognizable, the bass is strong and powerful
- Inductors are fixed with double ties to prevent music resonance
A$16.47 A$20.26
- For: bookshelf speakers
- Filter characteristics: a high and low
- Power: 200W
- Impedance: 4-8 ohm
- Frequency point 2830Hz
- Capacitor optimizes the sound quality, maintains circuit stability and improves crossover performance
- High-temperature inductors to bring powerful and deeper bass effect
- Solder-free terminals for easy installation at any time
A$15.53 A$18.95
- Application scope: for stage speakers or home speakers high school bass DIY
- Filtering characteristics: high middle and low three frequency
- Frequency Response: 40Hz-20KHz
- Power: 300W
- Impedance: 4-8 ohms
- Applicable speakers: A models: 3 inch; B models: 4 inch; C models: 3-5 inch
- 66mm large skeleton inductor, so that the low-frequency signal through the rapid, reduce heat, show frequency response
- Frequency point adjustable, no welding line design, easier to install and use
A$19.47 A$22.98
- Application scope: for stage speakers or home speakers high school bass DIY
- Filtering characteristics: high middle and low three frequency
- Frequency Response: 40Hz-20KHz
- Power: 300W
- Impedance: 4-8 ohms
- Applicable speakers: A models: 3 inch; B models: 4 inch; C models: 3-5 inch
- 66mm large skeleton inductor, so that the low-frequency signal through the rapid, reduce heat, show frequency response
- Frequency point adjustable, no welding line design, easier to install and use
A$19.47 A$22.58
- Application: speaker tweeter DIY
- Power: 80W
- Frequency response: 48Hz-20KHz
- Applicable impedance: 4-8 ohms
- Through the toggle treble adjustable switch, reach about 2800Hz-3200Hz adjustable
- Fireproof board made of PCB board, stronger carrying capacity, thick copper layer, better conductivity
- Size: 68 x 45mm
A$9.25 A$11.01
- Filter characteristics: pure midrange crossover
- Frequency Point: 750~2000Hz
- Power: 120W
- Impedance: 4-8 ohm
- Solderless terminals, easy to install and use
- 1.0 large wire frame, high-temperature resistant, copper-clad aluminum enameled wire inductors
- MKP capacitors, low loss of high frequency response, clear sound quality
- Size: 100 x 54 x 28mm
A$14.17 A$17.15
- Applicable: car audio modification
- Frequency response: low: 55Hz; high: 20KHz
- Power: 120W
- Applicable impedance: 2/4/6 ohm
- Black chassis with frosted finish, not easy to leave fingerprints or traces, beautiful and generous
- Double infusion heat dissipation ABS shell, better heat dissipation, longer service life
- 2 ties are used to fix the inductors more firmly
- 6-position non-soldering plug, easy to use
A$14.87 A$17.10
- Scope of application: DIY modification and upgrading of home speakers
- Filter characteristics: 1 high, 1 medium, 1 low three-way frequency
- Power: 250W
- Impedance: 4-8 ohm
- Crossover point: bass/midrange 850Hz; treble/midrange 5200-5500Hz adjustable
- This crossover adds the function of adjustable high audio point, which can meet more people needs and adapt to more speakers
- Inductors using ties and high-temperature audio special glue fixed to prevent resonance
- No welding wire terminals, easy to install and use
A$16.36 A$20.44
- Application: speaker high bass DIY
- Power: 100W
- Frequency response: 48Hz-20KHz
- Applicable impedance: 4-8 ohms
- High current inductor high temperature resistant inductor, so that the low frequency signal quickly through, reduce heat, show frequency response
- 4-position non-welded terminals, eliminating the need for traditional welding wires
- Size: 70 x 50mm
- Weight: about 93g
A$10.00 A$11.60
- Suitable for: bass audio modification
- Power: 220W
- Applicable impedance: 4-8 ohms
- Frequency point: 500Hz/550Hz (adjustable)
- Filter: pure bass crossover frequency
- Bass adjustment switch, fluctuation switch to adjust the different bass effects
- More audio capacitors in parallel, filter out most of the mid-range and high frequency
- High-temperature copper-clad aluminum wire winding, durability, to provide long-lasting performance and stable audio output
A$14.70 A$17.78
- Application: car audio modification
- Power: 120W
- Frequency response: low: 45Hz; high: 20KHz
- Applicable impedance: 2/4/6 ohm
- Bass inductor + polymer magnets, enhance the sinking degree of the bass
- Double infusion heat dissipation ABS plastic shell, beautiful and generous
- 6-position solder-free plug, easy to use
- Size: 120 x 65 x 33mm
A$14.78 A$17.44