Search
WORLDWIDE SHIPPING
fast, flexible, secure options
ONLINE SUPPORT 24 / 7
anytime, anywhere help
MONEY BACK GUARANTEE
shop with confidence
WIDE SELECTION
every day low prices
RC Toys & Accessories
LKTOP 100W Gallium Nitride Fast Charger AC Adapter With 3 USB-C/Type-C+1 USB-A Port US Plug
- 100W gallium nitride multi-port charger, lightning fast charging, saving time and worry, high energy efficiency conversion rate, low loss, not easy to get hot when charging, more suitable for charging drones, action cameras, and handheld shooting equipment products.
- 3 USB-C+1 USB-A port output, intelligent identification and distribution of power, safe charging without damaging the machine
- 90-degree folding plug, easy to carry
- Built-in multiple safety protections, with over-current, over-voltage, over-temperature and other protections, no screen skipping, no screen flickering, and battery protection to protect your charging process. Super fast charging also brings more safety.
- Parameter:
- Interface: Type-C1/C2/C3/USB-A
- Input: 100-240V 50/60Hz 2A
- Type-C1/C2 output: 5V-3A, 9V-3A, 12V-3A, 15V-3A, 20V-5A (100WMax)
A$61.81 A$74.18
For DJI Air 3 Smart Flight Battery LKTOP 200W 3-Channel Charging Manager
- 200W Air 3 3-channel charging manager, supports 2 100W inputs. In standard mode, the first battery is fully charged in 60 minutes, and the three batteries are fully charged in 80 minutes; in fast charging mode, the first battery is fully charged in 40 minutes, and the three batteries are fully charged in 60 minutes. (The above charging time is based on the Charging Manager with two LKTOP 100W desktop chargers, and the initial battery capacity is 0-10%. The charging test data is measured in a laboratory environment (room temperature 25 degrees Celsius) and is for reference only. .)
- With built-in screen display function, you can view each batterys information, voltage, capacity, temperature, number of cycles, power, etc.
- Exquisite and compact design, the contact area between the battery and the charging compartment is small, and the battery is suspended on all sides for good heat dissipation, which delays the battery lifespan.
- Three charging modes are available: the charging butler has three modes: 100% standard mode, 95% fast charging mode, and 60% storage mode to meet different needs.
- Power bank output mode: When the USB-C input port is not connected to the power supply, insert the battery, long press the function button to turn on the phone, enter the power bank output mode, and connect a mobile phone or other digital device to the USB-C output port.
- Power collection function: The charging butler has a power collection function that concentrates the remaining power in multiple low-power batteries into a battery with high remaining power, allowing you to use one more battery.
- Power balancing function: The charging butler has a power balancing function. The power balancing function is to distribute the power in high-power batteries to other low-power batteries, so that all batteries have the same power, and energy is recycled without waste, which is convenient for long-term storage and aviation. Transportation etc.
- Built-in multiple safety protections, including over-current, over-voltage, over-temperature and other protections
A$109.91 A$129.69
For DJI Osmo Action 4/3 aMagisn Body Bag Mini Storage Shell
- Real camera open mold, fully fit the body, easy to carry and storage
- Body bag in the camera USB cover to do the opening design, USB cover can be opened and closed at will, at any time to the camera charging
- Inner layer of velvet, soft touch, shock absorption and protection of the camera
- Surface case using woven ants fabric, wear-resistant and not easy to scratch, effectively prevent the invasion of water and snow, long-lasting use does not fall off the skin
- Bottom opening, can be directly connected to the selfie stick and other camera brackets
- Material: PC+nylon
- Weight: about 32g
- Size: about 9.7 x 7 x 4.2cm
A$15.25 A$18.46
For DJI Mini 4 Pro Drone BRDRC Landing Gear Increased Height Leg (Gray)
- Heightened landing gear for Mini 4 Pro, effectively increasing the fuselage by 14mm to prevent ground debris from contaminating the fuselage and sensors during takeoff and landing.
- It can still take off and land on uneven ground, effectively protecting the safety of the fuselage;
- Light weight does not affect flight, triangular structure design, stable and not easy to fall off;
- Quick-release design, easy to install and remove.
- Main material: ABS
- Net weight: 20g
- Product size: 7 x 2.3 x 1.8cm (front feet), 5.1 x 4.6 x 2.5cm (rear feet)
A$13.10 A$16.38
For DJI Mini 4 Pro Sensor/Lens Tempered Film Anti-scratch Protector, Spec: 1 Set
- 9H high hardness tempered glass;
- Anti-scratch, anti-explosion, effectively protect the camera;
- High definition, high light transmittance, easy to install without bubbles.
- Main material: tempered glass
- Attribute: Transparent
- Net weight: 2.7g (1 set), 4.6g (2 sets)
- Product size: 1.5 x 1.5cm (lens film), 0.9 x 0.9cm (sensor film)
A$12.42 A$14.53
For DJI Mini 4 Pro Sensor/Lens Tempered Film Anti-scratch Protector, Spec: 2 Sets
- 9H high hardness tempered glass;
- Anti-scratch, anti-explosion, effectively protect the camera;
- High definition, high light transmittance, easy to install without bubbles.
- Main material: tempered glass
- Attribute: Transparent
- Net weight: 2.7g (1 set), 4.6g (2 sets)
- Product size: 1.5 x 1.5cm (lens film), 0.9 x 0.9cm (sensor film)
A$12.42 A$14.40
For DJI Osmo Action 4/3 aMagisn Silicone Protection Case Camera Protection Accessories (Blue)
- All-around protection, no fear of scratches and bruises
- Front screen, rear screen, microphone holes, speaker holes, color temperature sensor and other holes, all accurately open holes
- Battery cover, USB cover, open and close as you like
- The bottom is reserved for the installation of quick release adapter, quick release adapter can be freely disassembled
- Equipped with a neck rope and the host set of anti-lost rope, portable use
- The surface is hand-feeling, skin-friendly and delicate
- Material: silicone
- Size: about 7.53 x 4.93 x 3.45cm
A$15.88 A$19.85
For DJI Osmo Action 4/3 aMagisn Silicone Protection Case Camera Protection Accessories (Black)
- All-around protection, no fear of scratches and bruises
- Front screen, rear screen, microphone holes, speaker holes, color temperature sensor and other holes, all accurately open holes
- Battery cover, USB cover, open and close as you like
- The bottom is reserved for the installation of quick release adapter, quick release adapter can be freely disassembled
- Equipped with a neck rope and the host set of anti-lost rope, portable use
- The surface is hand-feeling, skin-friendly and delicate
- Material: silicone
- Size: about 7.53 x 4.93 x 3.45cm
A$15.88 A$19.68
For DJI Osmo Action 4/3 PULUZ Metal Cage Expansion Adapter Frame with Cold Shoe (Black)
- Suitable for DJI Osmo Action 4/3 action camera;
- Made of high-quality aluminum alloy material and CNC process, the product is durable and textured;
- It can protect the camera well and prevent camera collision; it has good heat dissipation performance and prevents the camera from collapsing due to overheating;
- Universal adapter, easy to install and remove;
- Wide compatibility. There are 1/4-inch screw holes for easy connection of selfie sticks, handles, and tripods; there is a DJI original magnetic adapter interface at the bottom;
- The cold shoe opening on the frame can be expanded to connect microphones, fill lights, etc.
- Package List
- Metal Frame x 1
A$32.22 A$40.27
NEED HELP?
Payment options
