Search
WORLDWIDE SHIPPING
fast, flexible, secure options
ONLINE SUPPORT 24 / 7
anytime, anywhere help
MONEY BACK GUARANTEE
shop with confidence
WIDE SELECTION
every day low prices
Electronics
Yahboom 4 Channel Infrared Tracking Sensor Module For Smart Car Robot, Spec: Module+DuPont Cable
- This tracking module uses four tracking probes and optimizes the spacing layout. The two inner probes can precisely identify the black lines, while the two outer probes can assist the inner probes in identifying the black lines and provide warnings. The vehicle can recognize 90-degree turns and other complex road surfaces.
- The knob-type adjustable resistor is combined with a professional operational amplifier circuit, allowing the adjustment of sensor sensitivity.
- You can connect it to the intelligent car or expansion board using jumper wires or DuPont cables for various experiments. The module is reserved with holes for installing copper columns and screws, making it convenient for you to expand by yourself.
- High-quality infrared probes, with onboard four-channel comparator circuits.
- 1.6-inch thick shock-resistant PCB.
- The module uses 6-pin pins and has an anti-reverse connection design for interfaces, which can effectively prevent positive and negative pole reverse connection and avoid module damage. It is simple and convenient to use.
- High-precision knob adjustment with a wide linear adjustable range.
- Reference materials, driver source code and graphical programming tools are provided.
A$14.81 A$17.47
Yahboom For Micro:bit V1.5/V2 Board Silicone Case Protective Shell (Yellow)
- This cute silicone case is suitable for Micro:bit V1 and V2 development boards. All the openings are specially designed for the second-generation Micro:bit development board and will not affect the speaker, touch logo and microphone.
- The dot matrix light is clearly visible: The thickness of the silicone shell is 1.5mm, the thickness of the dot matrix area is 1mm, and the thickness of the LED cell is 0.5mm. The dot matrix light can easily pass through the silicone shell and be clearly displayed on the shell.
- The silicone shell has speaker holes, reset button caps, micro USB interfaces and battery power interfaces, which are convenient for sound playback, reset, power supply and programming of the development board.
- Users can install it on expansion boards or robots. It not only protects the Micro:bit development board but also makes your work more attractive.
- Dimensions: 56.5 x 10.2 x 37mm
- Material: Silicone (environmentally friendly material)
- Compatible mainboards: Suitable for micro:bit V1.5/micro:bit V2.X
A$12.01 A$14.66
Yahboom For Micro:bit V1.5/V2 Board Silicone Case Protective Shell (Green)
- This cute silicone case is suitable for Micro:bit V1 and V2 development boards. All the openings are specially designed for the second-generation Micro:bit development board and will not affect the speaker, touch logo and microphone.
- The dot matrix light is clearly visible: The thickness of the silicone shell is 1.5mm, the thickness of the dot matrix area is 1mm, and the thickness of the LED cell is 0.5mm. The dot matrix light can easily pass through the silicone shell and be clearly displayed on the shell.
- The silicone shell has speaker holes, reset button caps, micro USB interfaces and battery power interfaces, which are convenient for sound playback, reset, power supply and programming of the development board.
- Users can install it on expansion boards or robots. It not only protects the Micro:bit development board but also makes your work more attractive.
- Dimensions: 56.5 x 10.2 x 37mm
- Material: Silicone (environmentally friendly material)
- Compatible mainboards: Suitable for micro:bit V1.5/micro:bit V2.X
A$12.01 A$14.78
Cwatcun D178 Universal Camera Strap Hand-woven Comfortable Pressure-reducing Portable SLR Camera Strap
- Stable hanging buckle, quick release and quick retrieval
- Hand-woven hanging rope, light and beautiful, strong and durable, resistant to pulling and dragging
- Multi-purpose design, convenient, fast, flexible and maneuverable
- Microfiber leather thickened shoulder pad, breathable, comfortable and decompressive
- Multiple ways of use, support neck hanging/single shoulder/crossbody/wrist strap
- Adjustable shoulder strap length
- Material: microfiber + braided rope
- Length: about 107-127cm
A$24.31 A$30.39
For Havit H2002D Headset Replacement Microphone 3.5mm TRS Boom Mic (4.0x160mm)
- Frequency response: 20Hz - 16KHz
- Impedance: 2.2K
- Signal-to-noise ratio: Greater than or equal to 58 dB
- Consumption current: Less than 500uA
- Earpiece size: Diameter 9.7 x 4.5mm
- Sensitivity: -32dB +/- 3dB (0dB = 1Pa)
- Directionality: Omnidirectional
- Plug: 3.5mm straight plug, gold-plated
A$9.68 A$11.33
3.5mm TRRS Lapel Microphone With Earphone Stereo Live Monitoring Headphones 1.2m
- Frequency response: 20Hz - 16KHz
- Impedance: 2.2K
- Signal-to-noise ratio: Greater than or equal to 58 dB
- Consumption current: Less than 500uA
- Speaker size: Diameter 6.0 x 2.7mm
- Sensitivity: -34dB +/- 3dB (0dB = 1Pa)
- Directionality: Omnidirectional
- Plug: 3.5 straight plug with 4 sections
A$15.05 A$17.61
3.5mm TRRS Lapel Microphone With Earphone Stereo Live Monitoring Headphones 2m
- Frequency response: 20Hz - 16KHz
- Impedance: 2.2K
- Signal-to-noise ratio: Greater than or equal to 58 dB
- Consumption current: Less than 500uA
- Speaker size: Diameter 6.0 x 2.7mm
- Sensitivity: -34dB +/- 3dB (0dB = 1Pa)
- Directionality: Omnidirectional
- Plug: 3.5 straight plug with 4 sections
A$15.87 A$19.84
SUITU ST-8113 Outdoor Turbine Fan Home Lithium-ion Dust Blower Handheld Hair Dryer, Style: Blower Gray
- Motor power: 160W
- Motor speed: 130000RPM
- Blowing force: up to 180g, 52m/s
- Vacuum degree: 4300/6800
- Input voltage: 5V/2A
- Battery capacity: 18650 2500mAh x 2 7.4V
- Charging time: about 2.5h
- Use time: about 1h
A$41.13 A$47.72
SUITU ST-8113 Outdoor Turbine Fan Home Lithium-ion Dust Blower Handheld Hair Dryer, Style: Blower+Vacuum Cleaner Black
- Motor power: 160W
- Motor speed: 130000RPM
- Blowing force: up to 180g, 52m/s
- Vacuum degree: 4300/6800
- Input voltage: 5V/2A
- Battery capacity: 18650 2500mAh x 2 7.4V
- Charging time: about 2.5h
- Use time: about 1h
A$44.40 A$54.17
MaAnt CJ-1Pro Electric Glue Remover Cutting Grinding Machine Phone Repair Screen Glue Removal Stick
- Rated power: 6W
- Battery capacity: 2000mAh
- Interface: Type-C
- Power input: DC 5V 0.7mA
- Application: colloid removal of various electronic devices such as mobile phones, watches, tablets, etc.
- Size: about 12 x 3.6cm
- Net weight: about 146g
- Pure copper motor, high power and strong power, long-lasting without heating or burning
A$25.29 A$31.11
MaAnt CJ-3 Electric Glue Remover Cutting Grinding Machine Mobile Phone Repair Screen Glue Removal Stick
- Power: 5W
- Battery capacity: 1800mAh
- Interface: Type-C
- Power input: DC 5V 1A
- Output: 2.8-3.7V
- Size: about 14.7 x 3.4cm
- Net weight: about 217g
- Pure copper motor, high power and strong power, long-lasting without heating or burning
A$31.84 A$38.84
60cm 3D Holographic Fan with 1600x720 Resolution & 720 LEDs WiFi/APP DIY Content Control (UK Plug)
- This is an innovative 3D holographic fan that uses high-speed LEDs to project vivid 3D images, animations and advertisements. It is suitable for commercial displays, retail scenarios or creative home decoration, and supports content transmission via a mobile app.
- Mobile app control: Upload pictures/videos directly via Wi-Fi (supporting formats such as MP4, AVI, JPG)
- Equipped with a remote control, easily adjust brightness and playback mode.
- Tool-free assembly: The light board does not require screws and is plug-and-play. It supports wall mounting or independent placement.
- 1600x720 resolution, 720 LED light beads, presenting clear and vivid images (brightness 2200cd/m).
- Aluminum frame + ABS/PC material, resistant to high temperatures and corrosion.
- Wireless update: Synchronize content through the mobile app, PC software or cloud material library (free preset templates).
- Multi-device synchronization: Supports splicing multiple devices to create a large screen effect.
A$226.78 A$281.21
NEED HELP?
Payment options
