Search
WORLDWIDE SHIPPING
fast, flexible, secure options
ONLINE SUPPORT 24 / 7
anytime, anywhere help
MONEY BACK GUARANTEE
shop with confidence
WIDE SELECTION
every day low prices
Electronics
For Samsung Galaxy A06 SM-A065F Original Power Button & Volume Button Flex Cable
- Volume button & power button flex cable replacement part.
- Replace your broken or unworkable item with a new one.
- Each item has been checked and in good condition before shipping.
- Completely fit and work.
- Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.
A$5.54 A$6.59
For Samsung Galaxy Tab A9+ SM-X210 Original SIM Card Reader Board
- SIM card reader board replacement part
- Replace your broken or unusable item with a new one
- Each item has been checked and in good condition before shipping
- Completely fit and work
- Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
A$8.50 A$9.95
Waveshare Barcode Scanner Module, 1D/2D Codes Reader
- Overview
- 1. This is a small 1D/2D codes reader, by using the intelligent image recognition algorithm, it will decode the barcode or 2D code on paper or screen, fast and accurately.
- Through the onboard USB and UART interface, it can be directly plugged into a computer, or be easily integrated to kinds of devices due to its small form factor.
- Features
- 1. Easy to use, requires no knowledges of image recognition
- Decodes various common 1D/2D codes such as Barcode, QR code etc.
- Onboard micro USB and UART serial port, allows to connect with computers or embedded devices
- Configurable via scanning 'configuration code'
A$58.02 A$70.20
Waveshare PCF8591 AD DA Board
- Overview
- 1. The PCF8591 AD DA Board features an 8-bit A/D Converter & D/A Converter PCF8591 with four analog inputs, one analog output and a serial I2C-bus interface.
- The PCF8591 AD DA Board features I2C pinheader on one side, and I2C connector on the opposite side. Hence, its more flexible to connect the board to your development system. The board also supports I2C cascading, allowing the use of multi module connected to the I2C bus at the same time by connecting the pinheader and connector.
- Features
- PCF8591, I2C pinheader, I2C connector, Adjustable resistor, Analog input for A/Dconversion, Analog output for D/A conversion, Address pins jumper
A$17.17 A$21.46
Waveshare Solar Panel (6V 5W)
- Specifications
- 1.Solar cell type: 156 monocrystalline cell
- Surface: toughened glass
- Frame material: anodic oxidation aluminum alloy
- Back board material: 0.25mm PET
- Power: 5.0W 5%
- Operating voltage: 6.0V 5%
- Operating current: 833mA 5% (max)
A$24.37 A$29.25
Waveshare VGA PS2 Board
- Overview
- The VGA PS2 Board is an accessory board designed for testing VGA and/or PS2 interfaces. It integrates VGA connector, PS2 connector, and control interface in one small module.
- The VGA PS2 Board comes with ready-to-use demo codes as well.
- Features
- VGA interface, PS2 interface, control interface
A$13.17 A$16.20
Waveshare Rotation Sensor
- Overview
- Detects clockwise/anti-clockwise rotations: degrees and laps
- Pulses per lap: 15
- Power: 3.0V ~ 5.3V
- Dimension: 32.1mm * 15.4mm
- Mounting holes size: 2.0mm
- Applications
- Positioning in Industrial Controls
A$13.17 A$15.80
Waveshare Liquid Level Sensor
- Overview
- Output voltage boosts along with the immersion depth of the module
- Detection depth: 48mm
- Power: 2.0V ~ 5.0V
- Dimension: 19.0mm * 63.0mm
- Mounting holes size: 2.0mm
- Applications
- Water level alarm
A$11.39 A$13.79
Wareshare Flame Sensor
- Overview
- 1. Sensitive to flame spectrum
- Features wide range voltage comparator LM393
- Adjustable sensitivity
- Signal output indicator
- Spectrum range: 760nm ~ 1100nm
- Detection angle: 0 - 60 degree
- Power: 3.3V ~ 5.3V
A$11.39 A$14.25
Waveshare Tilt Sensor
- Overview 1. Detects shake signal 2. Signal output indicator 3. Dimension: 19.0mm * 16.0mm Applications 1. Shake detection 2. Guard alarm 3. Smart car 4. Electric bricks
A$11.39 A$13.11
Waveshare DHT11 Temperature-Humidity Sensor
- Temperature-Humidity Sensor, DHT11 Onboard
- Overview
- This is a calibrated digital temperature and humidity module with onboard sensor DHT11. It can be used for detecting ambient temperature and humidity, through the standard single-wire interface.
- Temperature
- Resolution : 1 degree C
- Accuracy : +/-2 degree C
- Measuring range : 0 degree C ~ 50 degree C
- Humidity
A$12.65 A$14.54
Waveshare BMP388 High Precision Barometric Pressure Sensor, Accurate Altitude Tracing
- BMP388 High Precision Barometric Pressure Sensor, Altitude / Barometric Pressure / Temperature Measuring, I2C/SPI Interface
- Overview
- This is a 24-bit high precision barometric pressure sensor, which allows accurate altitude tracing, as well as barometric pressure / temperature measuring. It supports both I2C and SPI interfaces, also is compatible with 3.3V/5V voltage levels.
- Due to its ultra small form factor, low power consumption, low noise and high precision, the BMP388 Barometric Pressure Sensor is suited for applications such as drones, accurate altimeter, environment monitoring, and IoT projects, and so on.
- Supports I2C (default) / SPI interface
- Onboard voltage level translator, compatible with 3.3V/5V operating voltage
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
- Operating voltage: 3.3V/5V
A$27.97 A$33.01
NEED HELP?
Payment options
