Consumer Electronics

View as Grid List

Sort by

Display per page

Yahboom PCIe To M.2 Adapter Expansion Board For Raspberry Pi 5 NVMe Expansion Board, Spec: Separate Board

This PCIe to M.2 expansion board specially designed for Raspberry Pi 5 is designed to bring more possibilities to your Raspberry Pi projects. With this expansion board, you can easily connect a high-speed M.2 NVMe solid-state drive to the Raspberry Pi 5, greatly increasing data transfer speed and storage capacity. It supports M.2 solid-state drives of various sizes (such as 2230, 2242, 2260 and 2280), and the installation process is simple and intuitive, so you can get started quickly without complicated settings. It not only expands the storage space of Raspberry Pi 5, but also provides better support for your computing tasks, making your Raspberry Pi 5 capable of more complex application scenarios.
Compatible with four sizes of solid state drives (2230/2242/2260/2280).
The stack is installed on the back of the Raspberry Pi without affecting heat dissipation and case installation.
Can improve data transmission speed, suitable for projects with high-speed storage requirements.
Using high-quality materials and precision manufacturing processes to ensure stable operation and long-term durability.
M.2 M-Key: NVMe protocol, supports M.2 SSD hard disk (2230/2242/2260/2280)
SSD function: supports an SSD hard disk to boot the system, and storage expansion or only storage expansion
LED indicator: power indicator, ACT hard disk status indicator

A$18.27 A$22.48

Yahboom 4 Channel Infrared Tracking Sensor Module For Smart Car Robot, Spec: Module+ 6Pin Cable

This tracking module uses four tracking probes and optimizes the spacing layout. The two inner probes can precisely identify the black lines, while the two outer probes can assist the inner probes in identifying the black lines and provide warnings. The vehicle can recognize 90-degree turns and other complex road surfaces.
The knob-type adjustable resistor is combined with a professional operational amplifier circuit, allowing the adjustment of sensor sensitivity.
You can connect it to the intelligent car or expansion board using jumper wires or DuPont cables for various experiments. The module is reserved with holes for installing copper columns and screws, making it convenient for you to expand by yourself.
High-quality infrared probes, with onboard four-channel comparator circuits.
1.6-inch thick shock-resistant PCB.
The module uses 6-pin pins and has an anti-reverse connection design for interfaces, which can effectively prevent positive and negative pole reverse connection and avoid module damage. It is simple and convenient to use.
High-precision knob adjustment with a wide linear adjustable range.
Reference materials, driver source code and graphical programming tools are provided.

A$14.14 A$17.53

Yahboom 4 Channel Infrared Tracking Sensor Module For Smart Car Robot, Spec: With DuPont Cable+16mm Copper Column

This tracking module uses four tracking probes and optimizes the spacing layout. The two inner probes can precisely identify the black lines, while the two outer probes can assist the inner probes in identifying the black lines and provide warnings. The vehicle can recognize 90-degree turns and other complex road surfaces.
The knob-type adjustable resistor is combined with a professional operational amplifier circuit, allowing the adjustment of sensor sensitivity.
You can connect it to the intelligent car or expansion board using jumper wires or DuPont cables for various experiments. The module is reserved with holes for installing copper columns and screws, making it convenient for you to expand by yourself.
High-quality infrared probes, with onboard four-channel comparator circuits.
1.6-inch thick shock-resistant PCB.
The module uses 6-pin pins and has an anti-reverse connection design for interfaces, which can effectively prevent positive and negative pole reverse connection and avoid module damage. It is simple and convenient to use.
High-precision knob adjustment with a wide linear adjustable range.
Reference materials, driver source code and graphical programming tools are provided.

A$14.91 A$17.45

Yahboom 4 Channel Infrared Tracking Sensor Module For Smart Car Robot, Spec: With DuPont Cable+23mm Copper Column

This tracking module uses four tracking probes and optimizes the spacing layout. The two inner probes can precisely identify the black lines, while the two outer probes can assist the inner probes in identifying the black lines and provide warnings. The vehicle can recognize 90-degree turns and other complex road surfaces.
The knob-type adjustable resistor is combined with a professional operational amplifier circuit, allowing the adjustment of sensor sensitivity.
You can connect it to the intelligent car or expansion board using jumper wires or DuPont cables for various experiments. The module is reserved with holes for installing copper columns and screws, making it convenient for you to expand by yourself.
High-quality infrared probes, with onboard four-channel comparator circuits.
1.6-inch thick shock-resistant PCB.
The module uses 6-pin pins and has an anti-reverse connection design for interfaces, which can effectively prevent positive and negative pole reverse connection and avoid module damage. It is simple and convenient to use.
High-precision knob adjustment with a wide linear adjustable range.
Reference materials, driver source code and graphical programming tools are provided.

A$14.91 A$17.15

SUITU ST-8113 Outdoor Turbine Fan Home Lithium-ion Dust Blower Handheld Hair Dryer, Style: Blower Black

Motor power: 160W
Motor speed: 130000RPM
Blowing force: up to 180g, 52m/s
Vacuum degree: 4300/6800
Input voltage: 5V/2A
Battery capacity: 18650 2500mAh x 2 7.4V
Charging time: about 2.5h
Use time: about 1h

A$38.59 A$46.69

SUITU ST-8113 Outdoor Turbine Fan Home Lithium-ion Dust Blower Handheld Hair Dryer, Style: Blower+Vacuum Cleaner Gray

Motor power: 160W
Motor speed: 130000RPM
Blowing force: up to 180g, 52m/s
Vacuum degree: 4300/6800
Input voltage: 5V/2A
Battery capacity: 18650 2500mAh x 2 7.4V
Charging time: about 2.5h
Use time: about 1h

A$40.86 A$48.22

60cm 3D Holographic Fan with 1600x720 Resolution & 720 LEDs WiFi/APP DIY Content Control (US Plug)

This is an innovative 3D holographic fan that uses high-speed LEDs to project vivid 3D images, animations and advertisements. It is suitable for commercial displays, retail scenarios or creative home decoration, and supports content transmission via a mobile app.
Mobile app control: Upload pictures/videos directly via Wi-Fi (supporting formats such as MP4, AVI, JPG)
Equipped with a remote control, easily adjust brightness and playback mode.
Tool-free assembly: The light board does not require screws and is plug-and-play. It supports wall mounting or independent placement.
1600x720 resolution, 720 LED light beads, presenting clear and vivid images (brightness 2200cd/m).
Aluminum frame + ABS/PC material, resistant to high temperatures and corrosion.
Wireless update: Synchronize content through the mobile app, PC software or cloud material library (free preset templates).
Multi-device synchronization: Supports splicing multiple devices to create a large screen effect.

A$217.57 A$269.78

Kuqibao K23S Helmet Bluetooth Earphones 1000m Motorcycle Bluetooth-compatible 2 Person Intercom With Light Waterproof Headset (Hard Wheat)

Bluetooth version: 5.3
Waterproof rating: IPX6
Battery capacity: 1000mAh
Transmission range: support 1000 meters two-person intercom
Weight: about 180g
Packing list: K23S host x 1, Type-C charging cable x 1, clip base x 1, sticker x 1, microphone pole sticker x 1, speaker sticker x 2, instruction manual x 1
Functional features:
5.3 Bluetooth chip, lower power consumption, stable connection, low latency, clear sound quality, more stable signal

A$44.24 A$51.31

For Karcher SC3upright Steam Cleaner Magic Floor Brush, Style: Black White+2 Cloths

Material: PP plastic, cloth
Applicable model: for Karcher SC3upright steam cleaner
Use with high-temperature steam, gently scrape, kill poison and remove dirt
Durable material, long service life
Wide brush surface, larger cleaning area, improve cleaning efficiency
Easy to fix and dismantle, simple and convenient to use
Size: about 98 x 178 x 315mm
Weight: about 240g

A$20.10 A$25.12

For Vorwerk Kobold SP7/SP600/SPB100 Vacuum Cleaner Magic Brush Frame (Green)

Material: plastic
Applicable models: for Vorwerk Kobold SP7 / SP600 / SPB100 vacuum cleaners
Robust and durable material, long service life, can be used for a long time
The mop hangs easily on the brush frame, making it easier to clean
Magic hook surface is directly molded on the surface of the plastic frame for longer durability
Size: about 290 x 128mm
Weight: about 67g

A$22.67 A$26.98

For iRobot Roomba 500/600/700 Series Side Brush Motor Vacuum Cleaner Replacement Parts (Gray Green)

Compatible Models: For iRobot Roomba 500 / 600 / 700 Series Vacuum Cleaners
Made of high-quality materials, durable
Easy to disassemble and replace as part of daily maintenance.
For better results, spare parts should be replaced every 1 - 3 months.
Exquisite and delicate, highly matched with the device

A$17.46 A$20.96

For iRobot Braava 380/380T/320/Mint 5200 Vacuum Cleaner Rubber Wheel (Black)

Compatibility: Suitable for iRobot Braava 380 / 380T / 320 / Mint 5200 vacuum cleaners
Easy to install and use
Real machine mold, high adaptability
Wear-resistant and durable, not easy to damage
Size: diameter 4.8cm x width 1.6cm

A$9.83 A$11.90