Consumer Electronics

View as Grid List

Sort by

Display per page

FNIRSI 3 In 1 Handheld Digital Oscilloscope LCR Transistor Tester, Specification: Standard

Display: 2.4-inch TFT colour screen, LED backlighting
Supply voltage: built-in 1500mAh rechargeable lithium battery
Charging specification: USB Type-C, +5V
Product volume: 79x103x31mm
Real-time sampling rate: 10MSa / s
Analogue bandwidth: 500Khz
Input impedance: 1 milliohm
Coupling method: AC/DC

A$82.07 A$99.31

FNIRSI Laser Range Finder Infrared Measuring Ruler (Gray)

Laser type: 620-670nm
Measurement time: 0.1~3s
Resolution: 1mm
Unit: m/ft/in
Measuring range: 0.05~40m
Covers a variety of measurement modes to easily meet the measurement needs of various scenarios: single measurement, multiple measurements, area measurement, volume measurement, primary Pythagorean, secondary Pythagorean, front and rear benchmarks, unit switching
High-precision laser ranging, intelligent algorithm, distance measurement is completed instantly with an accuracy of 0.002m, and the measurement is fast and accurate
LCD high-definition display, clear readings, equipped with gravity-sensing automatic flip design

A$47.35 A$59.19

PAM8403 Mini 5V Digital Amplifier Board USB Power Supply Good Sound Effect, Specification: With Potentiometer

Power supply range: 5V DC
Operating voltage: 2.5V-5.5V
Output Power: 3W x 2 (5V 4)
PAM8403 is a small digital amplifier chip, high-definition sound quality highlights the advantages of digital chips
Circuit using a reasonable peripheral configuration, power supply filter upgrade to 470uf, 1.6mm fiberglass plate, the amplifier board to do the meticulous
Output 3W + 3W high-fidelity sound quality, potentiometer using the original anti-surface body, life expectancy of up to 15 years, potentiometer with a switch can be counterclockwise directly cut off the power supply.
Please ensure that the power supply voltage does not exceed 5.5V, and please do not reverse the positive (+) negative (-) polarity, otherwise it will burn the circuit board!
Size: with potentiometer about 29.5 x 20.2 x 15 mm, module about 21 x 18 mm

A$6.85 A$8.36

FNIRSI Handheld Small Digital Oscilloscope For Maintenance, Specification: Upgrade

Sampling rate: 25Ms/s
Bandwidth: 200k
Vertical sensitivity: 10mv/div- 20v/dIV (1-2-5 gradual)
Time base range: 10s/Div-50s/Div (1-2-5 increment)
Voltage range: X1: 40V (VPP: 80V), X10: 400V (PP: 800V)
Triggering method: automatic routine/single shot
Coupling method: AC/DC
Display: 2.8 inches/PPI: 320*240

A$45.05 A$52.26

For Dyson Hair Dryer Airwarp Diffusion Nozzle Attachment Replacement Accessories Without Adapter

For Dyson Airwarp , turn your Airwrap Styler into a hair dryer in seconds, quick dry for precise styling and volume
Made of high quality material, durable
Material: nylon + high temperature resistant glass fiber
Adapter size: 93 x 46 x 76mm, weight 100g
Diffusion nozzle size: diameter 134mm, weight 120g

A$9.89 A$11.47

Vacuum Cleaner Tip Adapter for Dyson V7 V8 V10 V11

Function: Steering
Suitable for Dyson V7 V8 V10 V11
The top adapter is about 40g, and the bottom adapter is about 150g
Durable, long service life, easy installation and reliable use
Material: ABS

A$19.07 A$21.94

Cordless Vacuum Cleaner Rear HEPA Filter For Dyson V11/SV14 (Single)

Material: plastic
Use environment: home
Applicable area: 101-150 square meters
Suitable for Dyson V11/SV14
When the sweeper is working, filter the dust
Stable cleaning performance and long service life
Effectively help improve cleaning efficiency and save cleaning time
Convenient installation and disassembly, highly matched with the equipment

A$12.63 A$14.65

Sweeping Robot Accessories for iRobot Roomba 600 Series

Product material: wear-resistant rubber + PP composite material + brush
Application area: 51-100 square meters
Function: Clear the dust in the gaps and corners
Suitable for iRobot Roomba 600 Series
Multifunctional accessory combination

A$22.90 A$28.39

For Roborock P10/Q Revo Vacuum Robot Water Filter Replacement Spare Parts

Brand new, high quality, durable
Can be easily removed and replaced
It is recommended to replace it every 2-3 months or according to your usage
Protect the service life of the vacuum cleaner and improve the performance of the vacuum cleaner.
Please confirm your vacuum cleaner model before purchasing

A$11.81 A$13.58

For Roborock G10 Vacuum Robot Water Filter Replacement Spare Parts

Brand new, high quality, durable
Can be easily removed and replaced
It is recommended to replace it every 2-3 months or according to your usage
Protect the service life of the vacuum cleaner and improve the performance of the vacuum cleaner.
Please confirm your vacuum cleaner model before purchasing

A$11.81 A$14.52

For Roborock G20/S8 Vacuum Robot Water Filter Replacement Spare Parts

Brand new, high quality, durable
Can be easily removed and replaced
It is recommended to replace it every 2-3 months or according to your usage
Protect the service life of the vacuum cleaner and improve the performance of the vacuum cleaner.
Please confirm your vacuum cleaner model before purchasing

A$11.81 A$14.41

For Roborock G20/S8 Plus/S8/S8 Pro Vacuum Cleaner Accessories 1 Dust Box

Made of high-quality materials to ensure the durability and reliability of accessories.
Compatibility: Suitable for Roborock G20 / S8 / S8 Plus / S8 Pro, providing better performance and usage experience.
There are a variety of accessories to choose from, such as side brushes, main brushes, filters, etc., to meet different cleaning needs.
Easy to install and remove: With simple design, users can easily install and remove accessories for easy cleaning and maintenance.
Improve cleaning effect: Accessories can better capture dust, hair and debris, improving cleaning effect.
For better results, spare parts should be replaced every 1-3 months.

A$16.38 A$20.47