Search
WORLDWIDE SHIPPING
fast, flexible, secure options
ONLINE SUPPORT 24 / 7
anytime, anywhere help
MONEY BACK GUARANTEE
shop with confidence
WIDE SELECTION
every day low prices
Diagnostic, Test & Measurement Tools
Battery Internal Resistance Tester Lead-Acid Alkaline Lithium Battery Tester, Model: IR500
- Voltage: 0.00V~120V
- Internal resistance measurement: 0.000m~500
- Input voltage: DC 120V (regardless of polarity), AC input is not allowed
- Measurement current: 50mA~50uAAC
- Measurement speed: 3 times/second
- Measurement signal frequency: 1KHz
- Screen and size: IR500 55x57mmTN black and white screen; IR 502 55x57mmTN color screen
- Power supply: 3.7V 1200mAh lithium battery
A$58.90 A$67.73
ANENG AN8009 NVC Digital Display Multimeter, Specification: Standard with Cable (Blue)
- Material: ABS
- Battery type: AAA battery x 2 (not included)
- AC voltage: 750V
- DC voltage: 1000V
- Alternating current: 10A
- DC current: 10A
- Resistance: 10
- Capacitance: 9.999mF
A$38.45 A$45.75
Wintact WT8812 Compound Gas Monitor Detection Alarm
- Gas measurement: The sensor warms up when the countdown is started. The refresh rate is 1HZ. Do not charge during the measurement of combustible gas, otherwise it may explode.
- High/low alarm: 4 default high/low alarms, 4 types of alarms, and the alarm sound can be turned off.
- Data recording: 1000 pieces of data can be recorded. The default interval of data recording is 5 seconds, which can be set in inL of the setting mode. When the interval is set to 0 seconds, the data logging function fails. The delete operation will delete all recorded data.
- Temperature display: set the unit to Celsius or Fahrenheit, the default unit is Celsius
- Automatic shutdown: automatic shutdown without operation within 30 minutes. This feature is turned on by default.
- Battery capacity: It is forbidden to start the unit to avoid measurement errors or explosion. If the battery is low, it may turn off automatically. Charging time: about 4 hours. Discharge time: about 8 hours.
- Zero point calibration: It is recommended to calibrate the device at zero point or zero offset every month to ensure the high accuracy of the measurement (please ensure that the battery power is above 2bar) calibration, and place it in the air for a period of time after powering on. Make sure that the device body temperature is slightly higher than the ambient temperature.
- Temperature compensation: the measured data is compensated within the range of -20 to 50 degrees Celsius
A$93.78 A$107.85
SNDWAY SW582 Handheld Digital Illuminance Meter High-Precision Digital Light Meter (SW582)
- Automatically switch the range, the probe can be rotated, with high-definition backlight, with data lock
- High sensitivity sensor, portable measurement
- Material: Plastic + Electronics
- Resolution: 1lux
- Working voltage: 4.5v
- Measuring range: 0-199 thousand lux
- Power supply mode: 3 AAA batteries (self-prepared)
- Product accessories: Host, manual, warranty card certificate, color box packaging
A$40.79 A$46.91
BSIDE U1 AC/DC Clamp Meter Electric Pen Current Digital Multimeter
- Three-in-one function, electric pen + ammeter + multimeter, strong practicality.
- Beautiful, portable, high precision, fast testing, more reliable.
- Color LCD display, LED flashlight design, enhanced reading experience.
- With full-range overload protection, automatic measurement at power on, and intelligent burn prevention.
- Automatic mode: can automatically identify AC voltage, DC voltage, resistance, and on/off.
- DC voltage: 0-610V
- AC voltage: 0-610V
- DC current: 1-100A
A$67.86 A$80.76
BSIDE U0 AC/DC Clamp Meter Electric Pen Current Digital Multimeter
- Three-in-one function, electric pen + ammeter + multimeter, strong practicality.
- Beautiful, portable, high precision, fast testing, more reliable.
- Color LCD display, LED flashlight design, enhanced reading experience.
- With full-range overload protection, automatic measurement at power on, and intelligent burn prevention.
- Automatic mode: can automatically identify AC voltage, DC voltage, resistance, and on/off.
- DC voltage: 0.800V-610V
- AC voltage: 0.800V-610V
- DC current: 1-100A
A$46.98 A$57.31
BENETECH GT5101 LCD Display Differential Pressure Meter, Specification:100KPa
- Charging method: 5V/1A mobile phone power adapter
- Charging time: about 1.5h
- Working time: about 13 hours
- Standby time: about 8 months, automatic shutdown when voltage is lower than 2.9V
- Working current: 90mA
- Power: 400mW
- Working temperature: -10 degrees to 60 degrees
- LCD interface display, data recording, battery power display
A$70.29 A$86.45
BENETECH GT8915 Digital LCD Screen Anemometer
- Power supply: 3.7V/1000mAh
- Operating temperature: 0 degrees Celsius to 45 degrees Celsius
- Air volume measurement range: 0-999900CMM
- Wind speed measurement range: 0-8800 feet/minute
- Operating humidity: 40-85%RH
- Storage humidity: 10%-90%
- The handle can be stretched for long-distance measurement, and the length can be stretched to 533mm
- Support five wind speed unit selections, manual/automatic shutdown
A$48.85 A$57.15
BSIDE GX1 Integrated Environment Monitor Temperature Humidity Altitude Noise Detection
- Temperature range: -20~60 degrees Celsius / -4~140 degrees Fahrenheit
- Humidity range: 10~99%RH
- Illumination: 0~199999 LUX / 0-199.99 FC
- Altitude: -700~9000m
- Air pressure: 300~1200hpa
- Noise: 30~130dB
- Display: LCD
- Power supply: built-in 3.7V 400mAh lithium battery
A$50.26 A$59.80
BSIDE G2 Portable Air Quality Detector Indoor Formaldehyde Tester
- HCHO detection range: 0.017-1.999mg/m3
- HCHO response sensitivity: 0.20mg/m3
- TVOC detection range: 0.096-9.999mg/m3
- TVOC response sensitivity: 0.100mg/m3
- Response time: 2 seconds
- Warm-up time: 200 seconds
- Sensor: air detection sensor
- Sampling rate: 1 second
A$27.45 A$32.94
BSIDE A50 Infrared Temperature Test Digital Multimeter
- DC voltage range: 0V-620V
- AC voltage range: 0V-620V
- DC current range: 1A-610mA
- AC current range: 1A-610mA
- Resistance range: 0-600M
- Capacitance range: 1nF-60mF
- Frequency range: 1.0Hz-9.999MHz
- Duty cycle: 10.0%-95.0%
A$50.84 A$58.48
BENETECH GT313D LCD Display Infrared Thermometer, Battery Not Included
- Measuring range: -50 degrees Celsius to 950 degrees Celsius (-58 degrees Fahrenheit to 1742 degrees Fahrenheit)
- Distance ratio: 12:1
- Emissivity: 0.95 preset
- This infrared thermometer is used to measure the temperature of the surface of an object, suitable for a variety of high-temperature, dangerous or difficult-to-reach objects, without contact
- This unit consists of optical components, temperature sensor signal amplifier, processing circuit and LCD display. The optical device collects the infrared energy emitted by the object and focuses it on the sensor. The sensor then converts the energy into an electrical signal. The signal is digitally displayed on the LCD display after the signal amplification processing circuit
- 1.5V AAAx2 batteries (not included)
A$23.52 A$27.99
NEED HELP?
Payment options
