The Compute Module PoE Board is a development board that you can plug a Raspberry Pi Compute Module into, and make use of the resources of Pi more flexibly. With the PoE (Power over Ethernet) feature, and versatile onboard peripheral interfaces, it is suitable for evaluating the Raspberry Pi compute module, also is an ideal choice for end products.
Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs.
10/100M auto-negotiation Ethernet port, with PoE enabled.
4 x USB ports, which allows connecting more USB devices.
2 x CSI camera interfaces.
Onboard HDMI / DSI interfaces for connecting displays.
Onboard USB TO UART, for serial debugging.
Cooling fan interface, autorun on power-up OR controlled by IO pins.
The Compute Module PoE Board is a development board that you can plug a Raspberry Pi Compute Module into, and make use of the resources of Pi more flexibly. With the PoE (Power over Ethernet) feature, and versatile onboard peripheral interfaces, it is suitable for evaluating the Raspberry Pi compute module, also is an ideal choice for end products.
Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs.
10/100M auto-negotiation Ethernet port, with PoE enabled.
4 x USB ports, which allows connecting more USB devices.
2 x CSI camera interfaces.
Onboard HDMI / DSI interfaces for connecting displays.
Onboard USB TO UART, for serial debugging.
Cooling fan interface, autorun on power-up OR controlled by IO pins.
This is an industrial expansion module based on Raspberry Pi CM4, which features common interfaces such as Gigabit Ethernet, HDMI, USB, and GPIO, allows additional 4G / 5G / LoRa wireless communication modules to be connected via the M.2 or Mini-PCIe socket. There are also industrial interfaces/resources including RS485, CAN, and RTC.
Combined with the industrial rail-mount protection case, the module is an ideal choice for building IoT gateway, 4G/5G router, IoT data acquisition, or even the PLC device in industrial automatic control system, and more.
CM4 socket: For all variants of Compute Module 4
Networking:
Gigabit Ethernet RJ45
M.2 B KEY / Mini-PCIe (via adapter), for connecting 5G / 4G / LoRa wireless module
Nano-SIM card slot, support standard Nano-SIM card for 5G/4G/3G/2G communication
This is an industrial expansion module based on Raspberry Pi CM4, which features common interfaces such as Gigabit Ethernet, HDMI, USB, and GPIO, allows additional 4G / 5G / LoRa wireless communication modules to be connected via the M.2 or Mini-PCIe socket. There are also industrial interfaces/resources including RS485, CAN, and RTC.
Combined with the industrial rail-mount protection case, the module is an ideal choice for building IoT gateway, 4G/5G router, IoT data acquisition, or even the PLC device in industrial automatic control system, and more.
CM4 socket: For all variants of Compute Module 4
Networking:
Gigabit Ethernet RJ45
M.2 B KEY / Mini-PCIe (via adapter), for connecting 5G / 4G / LoRa wireless module
Nano-SIM card slot, support standard Nano-SIM card for 5G/4G/3G/2G communication
Based on Qualcomm platform, support 5G NSA and SA networking, support multi-mode & multi-band
Multi-constellation dual-band positioning: GPS, Beidou, Glonass, Galileo, and QZSS
Operating system support: Windows/Linux/Android
USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G communication
Standard M.2 B KEY slot, compatible with different 5G modules: SIM8202X-M2 / SIM8200EA-M2 / SIM8262X-M2 series
Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino
Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply
Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status