Cars & Vehicles

View as Grid List

Sort by

Display per page

Car Fault Detector OBD Bluetooth Multi-Function Detection

Parameter:
Bluetooth version: V5.1, backward compatible
Working voltage: 5V-28V, typical value 12V, supports 12V gasoline and some pure electric vehicles, and is compatible with 24V voltage
Working current: 4mA (working current when the LED indicator is turned off, Bluetooth is connected, and communicates normally with the ECU)
Sleep mode: Automatically enters sleep mode after 10 minutes of no Bluetooth connection.
Connection method: With YMOBD software, there is no need to enter system settings or Bluetooth pairing. One-click connection is achieved through Bluetooth BLE, saying goodbye to cumbersome operations.
Software attributes: With YMOBD software, you can display specific models and actual product pictures or logos.
Can also support third-party software application connection: CarScanner, Torque

A$18.52 A$22.78

EWS-4.3 & 4.4 IC Adaptor for BMW for X-PROG/AK90/R270 Programmer

Reading & writing data dump from EWS immobilize.
Can be working with R280 Plus, X-PROG, AK90 & R270 Programmer
Without soldering any wires, just on board.
Working with X-PRO programmer: no need of the small circuit on reading.
Working with R270 programmer, must be with the longer cable.

A$50.70 A$60.84

Car OBD To Cigarette Lighter Female Seat Driving Recorder Power Cord 50cm

Mostly used for cigarette lighter modification of automobile, power supply and motorcycle circuit
Using high-quality environmentally friendly materials, carefully designed and constructed
50cm: multi-function 1 turn 2 (with independent switch)
60cm: multi-function 1 turn 1
Material: pvc
Working voltage: 12-24V universal
Line length: 50cm/60cm
Weight: about 130g

A$16.54 A$20.01

LAUNCH CR3008Plus Car Engine Fault Diagnosis Tool

Supports reading and clearing codes, and can also retrieve a large amount of information from the engine control unit (ECU). When something goes wrong with your car, the ECU triggers the check engine light.
Retrieve and display test results for emissions-related powertrain components and systems. This is a way to find out if your engine has misfire or compression issues on specific cylinders, or other data that might indicate a problem but isn't enough to trigger the check engine light.
Supports most 12V diesel and gasoline vehicles. The vehicle complies with the standard OBDII/EOBD protocol and has an OBDII16 Pin diagnostic port.
Supported languages: Portuguese, German, Japanese, Russian, Spanish, English and French
Voltage: 12V
Working temperature: 0-60 degrees Celsius
Functions:
Read Code: Displays a detailed description of the Diagnostic Trouble Code (DTC)

A$64.88 A$81.09

Air Wedge Pump Up Bag Lock Pump Car Door Window Frame Fitting Install Shim Wedge Tool

Car air pump wedge inflatable shim.
Powerful hand pump lifts up to 220 lbs, span gaps 3/32 to 2 inches.
Can be used for window, door and cabinet installations; replaces damaging pry bars and wooden shims.
Very easy to inflate and deflate the shim. When you inflate the air shim, it stays pressurized. When you press the button near the air pump, it can release the air quickly.
Convenient to use. Durable and practical.
Material: Polyurethane rubber
Size: approx. 170 x 150mm

A$12.84 A$15.40

U600+ VAG CAN EOBD/OBDII Professional Scanner

VAG (VW/AUDI/SEAT/SKODA):
Works with Volkswagen vehicles (Audi/ Seat/ Skoda/ Jetta/ Golf / Beetle/ Touareg/ GTI/ Passat and more) since 1990.
Supports all VW Diagnostic protocols includes KWP1281\ KWP 2000\ TP-CANBUS \ NEW UDS.
Reads ECU and Live data , Reads data, Erases fault codes, Resets service lights, etc.
Turns off the MIL Lights after clearing fault codes.
Easily detects nearly 130 systems includes engine, ABS, Airbags, transmission, radio, climate control, instruments, immobilizer and so on.
Oil Reset: After the oil vehicle maintenance, reset oil service light.
Airbag Reset: In the case of vehicle airbag safety, it is not advisable to use this function to avoid a malfunction.

A$100.86 A$123.04

Car OBD2 Diagnostic Cable for Ford

Read the fault code
Clear trouble codes
Read the data stream
Data recording
Module reset
Module Installation
Re-program the ECU TCM BCM and so on
Clear the airbag (RCM) collision data

A$18.50 A$22.39

Ancel AD310 CAN OBD2 Car Engine Fault Diagnosis Tool

Voltage: 12V
Working temperature: -20 - 40 degrees Celsius
This product is specially designed for your car engine. It locates the problem and verifies the repair before repair, convenient and fast.
This is a fast and easy-to-use code reader that can be slipped into a purse or glove box, allowing the driver to monitor the health of the vehicle.
Read and clear fault codes: generic, pending and manufacturer specific.
Function:
read real-time data stream
Show I/M readiness status

A$49.58 A$58.01

OBD II ELM327 WiFi V1.5 Car Fault Diagnostic Tool PIC25K80 Chip

Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
Clear trouble codes and turn off the MIL (Check Engine light)
Display current sensor data, including: Engine RPM / Calculated Load Value / Coolant Temperature / Fuel System Status / Vehicle Speed
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Timing Advance
Intake Air Temperature

A$18.34 A$22.74

TS170E-Z 12V Car Resistance Trailer Plug Socket Trailer Tester Connector Recorder With 2 Conversion Heads EU Plug

Material: nylon
Weight: about 319 grams
Size: about 19.6x5.5x4.2 cm
Voltage: 12V
Power supply: 1 9V battery (you need to bring your own)
Function: test the signal between the towing vehicle and the towed vehicle
2 conversion heads: 7-pin plug to 13-pin socket (about 71.6 g/8.2x5.2x4.8 cm), 13-pin plug to 7-pin socket (about 77.3 g/6.9x6.3x4.5 cm)
Applicable models: cars, RVs, trailers, etc.

A$19.42 A$24.28

TPA01 150 PSI 2 in 1 Digital Tire Pressure Gauge TPMS Tire Pressure Monitoring System

Works on most general motors, equipped with 315/433 MHz and added in tire pressure gauge function to maintain correct tire pressure, reduce tire wear and extend tire life, and gauge automatically resets when taking pressure, no need to calibrate or reset the device.
Auto-shut off in 30sec for battery preservation.Designed with replaceable batteries and power switch.Please use NEW 9V battery.(not include in package)
Digital display reading instantly and clearly .You can rotate between PSI BAR KPA and even Kg/cm2 by pressing the left button before taking a pressure reading.
4 settings with range: 0-150PSI / 0-7Bar / 0-7Kgf/cm2 or 0-700KPA and accurate readings in 0.05 increments.(Works on all car, Motorcycles and bicycles)
It can help you reset all tires much easier just with 3 steps. Ensure that the vehicle is in the TPMS Learn Mode, Hold right antenna against the sidewall of the tire, near the valve stem. Depress right button while holding the tool against the tire sidewall.If you place the left head on the valve,the gauge read the pressure and stays on the display after you remove the gauge from the valve too.

A$24.00 A$28.33

KONNWEI KW912 Android Phone Dedicated OBDII Car Auto Diagnostic Scan Tools Auto Scan Adapter Scan Tool Support 6 Protocols (Can Only Detect 12V Gasoline Car)

Support ISO 9141
Support KWP2000
Support CAN bus
Support SAE J1850
Support J1850 VPW
Support J1850 PWM
Default language: English

A$17.55 A$20.54