Sort by
Display per page
- Durable and reliable.
- Material: ABS
- Color: black
- Size:
- Dimensions: 100mm
- Hole size: 75mm
- Take over size: 75mm
- Application: suitable for air-conditioning vent such as motorhomes, buses, yachts, etc.
A$12.68 A$15.34
- Fast heat dissipation, which can reduce operating temperature and prolong part life
- Accurate short-circuit protection
- High current welding connection, high reliability
- Same mounting and connector as OE
- OE form, coordination and function can realize precise coordination and reliable operation
- Replace the old and bad automobile relay air conditioner controller
- OE number: 1J0919506K
A$27.49 A$31.62
- Side Air Vent With Blower Fan, suitable for RVs, Trailers, Motorhomes etc
- Universal for 12V vehicles.
- Made of durable plastic, weather proof and wear resistant.
- Voltage: 12V
- Current: 0.3A
- Dimensions: Approx. 205x185x70mm/8.0x7.3x2.8 Inch
- Cutout Size: 175x155mm/6.9x6.1 Inch
- Min Mounting Thickness: Approx. 50mm/2.0 Inch
A$19.56 A$23.86
- Effectively filter debris and purify the air in the car.
- Does not affect the use of the original car.
- Easy to install.
- Installation location: air inlet
- Applicable to Tesla Model 3 2021
A$9.06 A$11.14
- Effectively filter debris and purify the air in the car.
- Does not affect the use of the original car.
- Easy to install.
- Installation location: air inlet
- Applicable to Tesla Model 3 2021
A$11.94 A$14.09
- The tightness is very good, the fit is high, the color is good, the craftsmanship is exquisite, and the installation is simple.
- Material: ABS
- Dimensions: 193x122mm, opening size: 165x96mm
- Screw hole diameter: M5
- Function: can replace damaged or old RV bus grille vent panel
- Scope of application: for RV, bus, passenger car or other modified car vents
A$8.96 A$11.10
- Size:
- Model 3: buckle 20.5 x 6 x 1/2 cm, horizontal bar 20.5 x 6.5 x 0.5/2 cm
- Model Y: buckle 20.5 x 6.5 x 0.5/2 cm, horizontal bar 21 x 6.3 x 0.8/2 cm
- Weight:
- Model 3: buckle 43 grams, horizontal bar 38 grams
- Model Y: buckle 48g, horizontal bar 52g
- Installation method: buckle/glue
- Installation location: under the seat
- Size:
- Model 3: buckle 20.5 x 6 x 1/2 cm, horizontal bar 20.5 x 6.5 x 0.5/2 cm
- Model Y: buckle 20.5 x 6.5 x 0.5/2 cm, horizontal bar 21 x 6.3 x 0.8/2 cm
- Weight:
- Model 3: buckle 43 grams, horizontal bar 38 grams
- Model Y: buckle 48g, horizontal bar 52g
- Installation method: buckle/glue
- Installation location: under the seat
- Safety design to prevent injury and refrigerant loss
- Easy to install and use, easy to operate
- Use: applicable to air conditioner fluoridation
- Material: valve body pure brass, handle aluminum
- R410: about 12mm
- R22: about 11mm
- Length: about 6.5mm
- Weight: side R410 models about 68g, side R22 models about 61g
A$10.60 A$12.71
- Safety design to prevent injury and refrigerant loss
- Easy to install and use, easy to operate
- Use: applicable to air conditioner fluoridation
- Material: valve body pure brass, handle aluminum
- R410: about 12mm
- R22: about 11mm
- Length: about 6.5mm
- Weight: side R410 models about 68g, side R22 models about 61g
A$10.60 A$13.24
- Safety design to prevent injury and refrigerant loss
- Easy to install and use, easy to operate
- Use: applicable to air conditioner fluoridation
- Material: valve body pure brass, handle aluminum
- R410: about 12mm
- R22: about 11mm
- Length: about 6.5mm
- Weight: side R410 models about 68g, side R22 models about 61g
A$10.60 A$12.40
- Safety design to prevent injury and refrigerant loss
- Easy to install and use, easy to operate
- Use: applicable to air conditioner fluoridation
- Material: valve body pure brass, handle aluminum
- R410: about 12mm
- R22: about 11mm
- Length: about 6.5mm
- Weight: side R410 models about 68g, side R22 models about 61g
A$10.60 A$12.50