Car Spark Plug Tester Detector with Dual Hole Advantage: Dual Hole Car Spark Plug Tester Detector have two testing holes, you can test two spark plugs meanwhile and and if you suspect any spark plug works improperly you could compare and test to make accurate judgment.
Usage: Test spark plug performance and ignition strength.
Application Range: 12V Gasoline vehicles car spark plugs.
Principle:
In automobile ignition system, the high-voltage ignition coil generates a high-voltage (10000 volts or more), and the spark plug diverts it form.
High-tension ignition coil into the cylinder engine, spark between the spark plug electrodes will ignite the mixture. The Detector could tell the good spark plugs from the bad by the strength of the spark.
Using Note:
Please Turn Off Power before you place spark plug.
Support WINDOWS XP, WIN7, WIN8, WIN10 Operation system.
Can perform airbag reset function well
Support new audi dash, support newer airbags
Including much more authorization
Functions
Universal Tool: CARPROG has powerful 16-bit MPU and a full set of automotive interface drivers. In basic version you will get hardware with extra functions: 12 input/output pins for EEPROM in-circuit programmer, future possibility to make on the same hardware Microcontroller programmer, K-line diagnostic, CAN line diagnostic,+5V/+12V output, USB, power supply only from USB.
High sensitivity: Brake fluid detector with 260 mm gooseneck probe for flexible detection.
Stable performance: Chrome-plated detector is resistant to oil and oxidation.
Accurate Assessment: Better than traditional methods that are difficult to provide accurate data, accurate assessment of oil performance.
Brake pressure was transmitted by brake fluid, the pressure transmitter will out of function once brake fluid includes too much water. In order to safe-driving, we must test the water ratio scale in brake fluid regularly. The brake fluid tester helps us do current maintenance, and make sure we drive in safety condition.
Humanized handheld design: the handheld part of the body is made of silicone material, which has excellent feel and lightweight design, and can be easily operated with one hand.
This diagnostic tool serves as an ignition coil tester, injector tester, and stepper motor tester, catering to a wide range of automotive diagnostic needs.
1.8 inch Color display: Multiple functions can be fully displayed on one screen, and the color screen can display various parameters more humanely.
Adds a multimeter function that can measure resistance and voltage, which is helpful for judg-ing the quality of components.
The step motor drive current increases. Improve PWM driving to avoid damage to test components. DC/DC power supply to reduce heat generation.
The new solution uses a 32-bit ARM chip, which can control all function outputs and collect various parameters.Output can be shut down in case of overcurrent.
Test light remedy the various deficiencies, VT100 has multi-function, such as automotive voltage tester, positive and negative polarity tester, car fuse tester, signal tester, design with exquisite workmanship, practical and durable, easy to use.
LED digital indicator, bidirectional voltage testing
Large size alligator clip, switch for different three working modes
Replaceable test light bulb, predictable frequency
Steel probe protective cover, two sharp stainless steel probes
Only for testing 5-30V, Please make sure that the voltage value of the product to be tested is within this range before testing.
When the LED indicator light is bright but test light bulb is not bright, it means bulb burnt out and should be replaced.