Repair & Diagnostic Tools

View as Grid List

Sort by

Display per page

ZK-083 2 in 1 Car Suspension Strut Spreader Socket Bit Tool for Volkswagen

Specially designed to remove/ install the locking nut on front suspension strut.
Easy to operate.
Reduces risk of damage to hub casting associated with using hammers and chisels to free the strut leg.
Suitable for Audi / Ford / Peugeot / Renault / Seat / Skoda / Volkswagen.
Size: 1/2 inch Square Drive, 7 x 5mm, 8.2 x 5.5mm

A$9.90 A$12.18

ZK-082 Car 50cm Suspension Strut Spreader Socket Bit Tool VW3424 for Volkswagen/Audi

Specially designed to remove/ install the locking nut on front suspension strut.
Easy to operate.
VM number: 3424
Fits for Volkswagen Golf GTI Jetta / Audi A4 1999- 2016
Size: 5x2.2cm

A$9.42 A$10.93

ZK-081 5 PCS Car 12 Point Sockets 1/2 Drive 18-24mm Strut Nut Socket Set

12 point sockets with cut away profile for removing and replacing strut nuts
1/2 inch D cut away sockets allows 90 degree Hex key to hold the strut whilst tightened to correct torque with a torque wrench (Hex key not supplied)
Sizes 18mm, 19mm, 21mm, 22mm, 24mm
Supplied with socket rail
Manufactured from Chrome Vanadium, durable

A$65.74 A$78.89

ZK-079 Car Camshaft Holding Tool for Ford 303-1248 303-1530 3.5L & 3.7L 4V Engine Timing Tool

Use this tool to accurately position and align hold your fit for Ford 3.5L & 3.7L camshaft at TDC to perform service.
Helps ensure Camshaft alignment during removal and installation of the timing chain.
Specially designed for camshaft holding in the TDC position and hold down chain tensioner in the compresssed position
Engine: 3.5L 3.7L 4.0L from 2007
Fits for Ford:
2007 2014 3.5L Edge
2011 2014 4.0L Edge
2011 2014 3.5L Explorer, F-150

A$42.54 A$49.35

ZK-078 7 in 1 Car Fuel Line Angled Disconnect Tool Set

Disconnects spring lock couplings on Ford and Chrysler AC lines
Works on fuel lines and other quick disconnect couplings on vehicles
The handles are angled to access tight spots
Six sizes1/4 inch ,5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch and 7/8 inch
Made of durable plastic that resists fuels and solvents.

A$7.12 A$8.90

Adjustable Universal Fuel Tank Cap Removal Tool, Style: Corner Type

Overall high temperature quenching treatment, high hardness, wear resistance, long life, easy to use
Tire air tube, easy to use, high hardness of alloy/plastic, more efficient inflation
Suitable for cars, motorcycles, electric vehicles, etc.
Adjustment range: 23-190mm
Alloy material, multi-purpose adjustment, easy to use
Format: formula
Material: chrome vanadium steel
Size: right-angle: 21 x 2.5 x 9.7cm, angled: 21 x 2.5 x 9.5cm, three-claw: 9 x 9 x 6.7cm, four-claw: 19.3 x 19.3 x 6.7cm

A$11.51 A$13.92

Car Modification Injector Removal Tool for Ford F-250 F-350 F-450 F-550

Assists in removing the injector from the cylinder head without damaging the injector and surrounding components.
Made of hardened 4140 steel with black finish, high hardness and durability, wear and corrosion resistance.
To reduce the possibility damage and facilitate disassembly, please soaks the injector in penetrating oil one day before removal.
Material: 4140 steel
Fits for 2011-2018 6.7L Powerstroke Ford F-250 F-350 F-450 F-550.

A$17.98 A$21.38

328-01 Engine Cam Locking Tool Replacement Timing Retainer (Red)

High temperature resistance, corrosion resistance, waterproof and rust proof
Suitable for all kinds of gasoline engines or diesel, etc.
Material: plastic
Stainless steel material, strong anti-collision ability
Simple operation and high configuration design
Thread design, environmental protection material
The bumps are non-slip, effectively locking
Specifications: double camshaft fixing fixture, screw rubber sleeve socket x4, mini camshaft fixing fixture x4

A$9.03 A$10.47

ZK-133 Car Engine Crank Locking Timing Tool T10340 T10504T10504/1 T10504/2 for Volkswagen 1.4 TSI/TFSI

Timing tool set for VAG Group 1.4 TFSI petrol engines with CoD (Cylinder on Demand) and ACT (Active Cylinder Technology).
This engine was fitted to Audi, Seat, Skoda and Volkswagen cars.
Set includes all tools need it to lock camshaft in right position during belt adjustment or replacement. Additional tools might be need it to work with this set - crankshaft pulley holding tool (ASTA A-8250), pulley holding tool (ASTA A-8084) or pulley holding tool set (ASTA A-8084UPG).
Store in a box, easy to carry.
OEM: T10340 / T10504 / T10504/1 / T10504/2
Fits for model:
For Audi
A1/A1 Sportback (2012-2018)

A$52.34 A$64.38

Car Engine Ignition Coil Remover Tool T10094A for Volkswagen/Audi

Designed to remove ignition coils mounted directly on spark plugs.
Easy to install.
OE: T10094A
Suitable for Volkswagen Bora, Golf, Polo, Touran 1.4/1.6L, Beetle, Passat, Lupo 4, ZYL, FSI, Phaeton, T4, BBY, BKY1.4 / Audi
Dimensions: 134 x 26mm

A$10.71 A$12.43

Car Engine Cylinder Compression Test Pressure Gauge

Check cylinder compression from 0 PSI to 300 PSI. (0 to 21kg/cm2)
Fits 14mm and 18mm spark plug threads
Equipped with air hold valve and meter reset button
11 inch hose, durable
Material: metal, rubber, plastic

A$14.89 A$18.62

Car Engine Oil Level for Peugeot 206 207 307

Made of ABS+stainless steel, long service life, easy installation, anti-rust and corrosion resistance, and can clearly measure the oil level.
An O-ring seals the top of the dipstick to prevent pollutants from escaping into the engine oil compartment.
Function: Check whether the engine oil level is normal, and reduce engine failures caused by unreasonable oil storage
Material: ABS
Fits for Peugeot 206 207 307

A$10.01 A$11.71