Repair & Diagnostic Tools

View as Grid List

Sort by

Display per page

DUOYI DY219 Digital Battery Analyzer Car Fault Diagnostic Device Current and Voltage Detector

This battery tester is used for lead-acid starting battery, along with checking the following conditions of the battery, starting up, charging, and loading.
With great design, easy operation, precise reading, complete functions, this tester supply the readings by a large LCD and hints by sound and light when testing.
It utillizes 4-wire Kelvin method to complete collection of a series of complicated data for calculating every testing data with build-in precise circuit and improved digital processor.
Some circuit improvements including polar reversal protection, over voltage input protection, loose lead detection, ensure safety and convenience during testing.
Voltage: 12V

A$30.20 A$34.74

DUOYI DY26A Car Ultrasonic Leak Location Determine Meter

It is suitable for testing leaks in confined spaces and has a 420mm probe.
Put the transmitter DY26-T into a closed container to be tested.
Sense pressurized leaks, detects electrical arcing, and finds falling solenoids, valves and bearings .
Comes with a transmitter that emits an ultrasonic frequency to help locate leaaks that are not pressurized. Enough to emit frequencies the detector can pick up.
Detects any pressurized leaking gas, including chlorofluoro carbon(CFCs), hydrofluoro carbon(HFCs), nitrogen(Ni), carbon dioxid.
Instructions
Put the transmitter DY26-T into a closed container to be tested.
Adjust the sensitivity of the DY26-R for receiver (you can adjust the sensitivity to the maximum at the beginning), and then hold the receiver DY26-R to slowly move along the measured object and listen to the sound from the headphones.

A$36.92 A$46.15

DUOYI DY23B Car Brake Fluid Detection Pen Moisture Tester

Brake pressure was transmitted by brake fluid, the pressure transmission will out of function once brake fluid including too much water. In order to safe-driving, we must test water ratio scale in brake fluid regularly. The brake fluid tester help us do current maintenance, make sure we drive in safety condition.
HD backlight dual display, support backlight display glare and easy reading day and night.
Operation Manual:
(1). Install one 9V(6F22) battery at the back of tester.(not included)
(2). After inserting the battery, press POWER button to turn on the tester, all LEDs lights turn on with buzzer sounding, which indicates the product self-test is successful.
(3). Press SELECT button, it will locate DOT3 model automatically.
(4). Each time you push the SELECT button, it will recycle from DOT3 to DOT4 to DOT5.1 with the indicator LEDs.

A$31.53 A$39.09

Car OBDII Protocol Detector Break Out Box

In the process of using decoder, error can be found and diagnosed OBD?? connector link.
You can monitor the OBD interface voltage and ground, showed low voltage.?? Display diagnostic stitching error.
Jump for OBD interface signals. Signal lines such as decoder of 7 to 15?? vehicles online.
Rapid detection of OBD2 diagnostic connector whether every stitch of the?? normal communication.
Replace the battery, save the car data function. When replace the battery,?? plug OBD2 connector into the car, at the same time connect additional power to the control box, so that ensure vehicle data is not lost.
This OBDII Protocol Detector & Break Out Box has wide range of applications??in diagnostics, key programming and chip tuning:
To monitor data steam while performing test on vehicle using a Scantool.?? This makes it possible for you to both execute a test and simultaneously monitor the testing process.
Display testing voltage on the car or truck

A$48.32 A$58.46

YAWOA BF200 Intelligent Brake Fluid Detector Brake Fluid Detection Pen Brake Fluid Moisture Detector

Material: ABS
Dimensions: 156x55x24 mm
Weight: about 140 grams
Operating environment: -10-50 degrees Celsius
Power supply: 2 batteries of size 7 (not included)
Test range: DOT3/DOT4/DOT5.1
Display: HD backlit display
This product is a handheld vehicle testing device that detects the water content in brake fluid to determine whether the brake fluid needs to be replaced.

A$31.81 A$39.77

Car 2 in 1 Diagnostic Tool Brake Fluid Liquid Tire Pressure Tester

It is a highly accurate,easy to use, very beautiful product.
The tester is a new high-tech product that combines automotive brake fluid testing and tire pressure testing. Users can regularly check the water content of the brake fluid of the car, making driving safer and more worry-free Using the right tire pressure can give you greater safery, longer tire life and better fuel consumption, and hope it will protect your safe driving.
Enter tire pressure test:
(1). Press the UP key to start testing the tire pressure. The pressure nozzle is pressed against the tire valve,The measurement results appear on the LCD display.
(2). Read the tire pressure directly on the display.
(3). Press the UP button continuously to convert the measurement unit.
(4). Press and hold the UP button for 3 seconds to turn off or Press the DOWN button to close.

A$15.78 A$18.46

DC 12V Ignition Test Instrument Spark Plug Ignition Detector Auto Diagnostic Test Tool

Quick and easy test helps check the condition of the ignition system, it is safe and easy to operate.
Light and small size, very convenient to carry.
Using high quality material, it can withstand high voltage and current test, spark plug type of metal head, convenient docking, durable.
Test method:
Extinguish the engine, then disassemble the spark plug coil.
Connected the black connector of tester to the spark plug.
Connected the metal end of tester to the spark plug coil.
Try to start the engine.

A$7.52 A$9.32

Brake Fluid Tester Car Diagnostic Tool 5 LEDs Brake Fluid Testing Tools

To check the quality of brake fluid quality.
5 LEDs to indicate percentage of water in the brake fluid.
Automatically power off.
Operated by a LR03 AAA 1.5V battery.
Press the button for power on, green LED will light up.
Insert the tester into reservoir for a second , then the results will be indicated correctly by LEDs.
Indications:
Green: Battery OK, i.e.: No Water Contained in the Brake Fluid.

A$10.30 A$12.15

0-25mm Electronic Digital Tread Plan Refinding Rounds Refinding Outcome Exists Tread Tablets Type Gauge Depth Vernier Caliper Measuring Tools (Silver)

Plastic tire tread depth gauge, range 0-25 mm.
Accuracy 0.01mm.
Safe driving essential measurement tool.
Large LCD display.
Zero setting at any position.
Mstric/inch system interchange.
Manual power on/off.
Suitable for tread depth, brake shoe and pad wear.

A$8.86 A$10.71

Mechanical Stethoscopes Mechanical Noise Detector Cylinder Noise Detection

Material: Rubber + plastic + stainless steel
This mechanics sonar scope helps isolate engine problems by letting you "hear" inside engine.
Super sensitive ear pieces & probe
Efectively locates trouble spots within engine block
Quickly locate the source of engine noise such as piston slap, worn gears and bearings, damaged valves, water pump failure and blown gaskets.
Also useful for tracking down dashboard rattles and squeaks.

A$10.16 A$12.60

JFIND JF109 Car Double Hole Spark Plug Tester (EU Plug)

Feature:
It has two testing holes, you can test two spark plugs meanwhile and and if you suspect any spark plug works improperly you could compare and test to make accurate judgment.
Adjustable double hole car spark plug tester detector ignition plug analyzer diagnostic tool.
Usage: test spark plug performance and ignition strength
Application range: 12V Gasoline vehicles car spark plugs
Widely application: 100V-240V input voltage .
Test principle: In automobile ignition system, the high-voltage ignition coil generates a high-voltage (10000 volts or more), and the spark plug diverts it form high -tension ignition coil into the cylinder engine, spark between the spark plug electrodes will ignite the mixture. The JF109 could tell the good spark plugs from the bad by the strength of the spark.

A$23.44 A$27.89

CAT-280 2 in 1 Car Battery Charger & Color Screen Battery Tester

Built-in various safety protections, reverse polarity protection, temperature protection, leakage protection, etc., safe to use
Using ABS flame retardant material, not waterproof
With multiple functions, easy to use and easy to carry
Features: 2 in 1 battery tester and battery charger
Main functions: battery charging, battery test, start system test, charging system test, view data, set language
Suitable for 12V SLI / AGM / EFB / GEL / LiFeP04 battery
Current (Max): 8A
Charging voltage: 2-200Ah

A$83.43 A$97.61