With comprehensive system diagnostic capabilities, support OBD2 function and automatic VIN identification
Compatible with iOS, Android and HarmonyOS operating systems, can be used on a variety of mobile devices
Various common special functions
Reset or reconfigure the vehicle's anti-lock braking system (ABS). This is done to restore the ABS system to its default state or clear any error codes or problems that may affect its performance. The purpose of resetting the ABS system is to ensure that the anti-lock braking function operates normally
DPF reset: reset or regenerate the diesel particulate filter (DPF) in the vehicle
Injector code: refers to the specific coding or programming related to the injector in the vehicle's engine management system
Throttle learning: refers to the specific coding or programming related to the fuel injector in the vehicle's engine management system
SAS reset: reset the vehicle's SAS (Steering Angle Sensor). SAS is a key component of the electronic stability control (ESC) system that helps maintain vehicle stability and prevent skidding during turns and other maneuvers
BST600 is a powerful battery tester that can not only test 12V batteries, but also handle 24V batteries, fully analyzing the battery's health, state of charge, temperature, CCA value, Ah input, voltage, internal resistance, ripple voltage, etc.
Built-in integrated printer compatible with standard thermal paper, which can save time and money by quickly printing work orders, seamless customer sharing and simplifying record keeping.
Compatible with a variety of vehicles, such as sedans, heavy trucks, as well as marine, lawn mowers, RVs and golf carts.
BST600 also supports 12V and 24V lead-acid batteries with a capacity of 100-2000 CCA, and various types including conventional flooded, AGM flat plate, AGM spiral, EFB and GEL batteries.
The sturdy fixture features loose lead detection, spark protection, reverse polarity, short circuit and overload protection to ensure your battery and personal safety. Even if you accidentally mishandle the electrodes, performance is fully enhanced compared to standard clamps, ensuring greater safety.
The BST600 is equipped with a 3.2-inch color backlit LCD display, providing easy-to-read visual data.
The housing is made of acid-resistant ABS plastic for durability and anti-slip performance, equipped with a silicone anti-break cable cover, and the soft rubber buttons add a comfortable touch while ensuring they are wear-resistant.
The BST600 also tests whether the battery temperature meets the optimal range, preventing overheating or cold-related problems, thereby improving performance, safety and service life.
It can be used to safely and quickly test spark plug performance
ST100 can simulate the working conditions of actual engines, and has the advantages of simple structure, easy use, large output energy, and durability.
Easy to operate, equipped with convenient power cord and plug to use
Just put the spark plug into the product hole and press the switch to test
Easy to use, non-professionals can easily master the operation steps
This instrument can help you diagnose injector problems, and can test the fuel injectors one by one to help confirm the stuck, leaking or combustion finished condition. It has four kinds of pulse signal output mode, users can choose any one according to their needs. Using 12V automobile battery as the power supply, the continuous working mode can identify the quality of the fuel injector when the engine is off, and the mode locking function ensures the consistency when testing the fuel injector. This instrument can be used with any fuel pressure tester
Operating Instructions
Tumn off the engine of the car.
Remove the wire plug with the fuel injector to be tested, and then connect the two pulse output terminals of the instrument with the fuel injector of the vehicle.
Connect the red clip of the instrument to the positive pole of 12V automobile battery, and connect the black clip of the instrument to the negative pole of the battery.
Press "Mode set" key to select the required pulse signal output mode, and the screen will display the currently selected mode. The different models are explained as follows:
Mode "1": single pulse mode. In this mode, when the "Pulse" key is pressed, the instrument will send out a pulse with a pulse width of about 255 Ms.
This product is a test wireless remote control frequency instrument, it can test the frequency of the remote control, can be clearly displayed;And can test the infrared induction is good or bad, lt is convenient for you to adjust the frequency you need when preparing the remote control.
"ON/OFF" is the power key for external frequency line test. The remote control that needs tobe tested will be emited close to this frequency meter(Placed in the test area), press the remotecontrol to open, you can test the frequency of the remote control, clearly displayed Frequencyvalue. (The effective test range is no more than 5CM. The closer the test area is, the moreaccurate the measured value will be;Car key frequency is generally divided into 320M HZ.434M HZ;868M HZ;)
"Lighting" is the key to turn on the front lighting; The front of the instrument is equipped withLED lighting, which is more convenient in bad light Place in use;
"INPUT" is an infrared input indicator. Will need to test the remote control with infrared light byclicking on it The red light shows that the infrared output of the remote control is normally emitted.lf the indicator is off. the Remote control infrared emitter failure, damage and other reasons;
"IR" is infrared receiving lamp;
Matters Need Attention
When testing, some electronic signal interference sources should be avoidedsuch as: signal towers, base stations, telephone poles, sending and receivingText messages, etc.